WeMos (6) Nikia 5110表示

こちらを参考して、苦労してなんとか表示できた。

下記のライブラリを追加してください

問題は、2番目のライブラリは、そのままWeMosに対応できない、エラーがたくさん発生する!

下記のプルリクエストが無視された見たい、手動で手元のライブラリに応用してください

 

配線:

WeMos D1 Mini Nokia 5110 PCD8544 LCD Description
D2 (GPIO4) 0 RST Output from ESP to reset display
D1 (GPIO5) 1 CE Output from ESP to chip select/enable display
D6 (GPIO12) 2 DC Output from display data/command to ESP
D7 (GPIO13) 3 Din Output from ESP SPI MOSI to display data input
D5 (GPIO14) 4 Clk Output from ESP SPI clock
3V3 5 Vcc 3.3V from ESP to display
D0 (GPIO16) 6 BL 3.3V to turn backlight on, or PWM
G 7 Gnd Ground

 

ソースコード

/* Hello World
 * Display a simple message on the first line of the screen
 *
 * Connections:
 * WeMos D1 Mini   Nokia 5110    Description
 * (ESP8266)       PCD8544 LCD
 *
 * D2 (GPIO4)      0 RST         Output from ESP to reset display
 * D1 (GPIO5)      1 CE          Output from ESP to chip select/enable display
 * D6 (GPIO12)     2 DC          Output from display data/command to ESP
 * D7 (GPIO13)     3 Din         Output from ESP SPI MOSI to display data input
 * D5 (GPIO14)     4 Clk         Output from ESP SPI clock
 * 3V3             5 Vcc         3.3V from ESP to display
 * D0 (GPIO16)     6 BL          3.3V to turn backlight on, or PWM
 * G               7 Gnd         Ground
 *
 * Dependencies:
 * https://github.com/adafruit/Adafruit-GFX-Library
 * https://github.com/adafruit/Adafruit-PCD8544-Nokia-5110-LCD-library
 * - This pull request adds ESP8266 support:
 * - https://github.com/adafruit/Adafruit-PCD8544-Nokia-5110-LCD-library/pull/27
 */

#include <Arduino.h>

#include <SPI.h>
#include <Adafruit_GFX.h>
#include <Adafruit_PCD8544.h>

// Pins
const int8_t RST_PIN = D2;
const int8_t CE_PIN = D1;
const int8_t DC_PIN = D6;
//const int8_t DIN_PIN = D7;  // Uncomment for Software SPI
//const int8_t CLK_PIN = D5;  // Uncomment for Software SPI
const int8_t BL_PIN = D0;


// Software SPI with explicit CE pin.
// Adafruit_PCD8544 display = Adafruit_PCD8544(CLK_PIN, DIN_PIN, DC_PIN, CE_PIN, RST_PIN);

// Software SPI with CE tied to ground. Saves a pin but other pins can't be shared with other hardware.
// Adafruit_PCD8544(int8_t CLK_PIN, int8_t DIN_PIN, int8_t DC_PIN, int8_t RST_PIN);

// Hardware SPI based on hardware controlled SCK (SCLK) and MOSI (DIN) pins. CE is still controlled by any IO pin.
// NOTE: MISO and SS will be set as an input and output respectively, so be careful sharing those pins!
Adafruit_PCD8544 display = Adafruit_PCD8544(DC_PIN, CE_PIN, RST_PIN);

void setup() {
  Serial.begin(9600);
  Serial.println("\n\nWeMos D1 Mini + Nokia 5110 PCD8544 84x48 Monochrome LCD\nUsing Adafruit_PCD8544 and Adafruit_GFX libraries\n");

  // Turn LCD backlight on
  pinMode(BL_PIN, OUTPUT);
  digitalWrite(BL_PIN, HIGH);

  display.begin();
  display.setContrast(60);  // Adjust for your display
  Serial.println("Show Adafruit logo bitmap");

  // Show the Adafruit logo, which is preloaded into the buffer by their library
  // display.clearDisplay();
  delay(2000);

  display.clearDisplay();
  display.setTextSize(1);
  display.setTextColor(BLACK);
  display.setCursor(0,0);
  display.println("Hello, world!");
  display.display();
  Serial.println("You should now see Hello, world! on the display");
}

void loop() {
}

参考